Difference between revisions of "ATIS"

Latest revision as of 16:57, 20 December 2021

ATIS is the abbrevation for "Automatic Terminal Information Servis and is a information service for airports. Further information about the ATIS system itself can be found here. In this article here we want to concentrate on ATIS during virtual controller sessions in Austrian airspace.

On VATSIM we use voice and text ATIS. That means, that the ATIS on the VATSIM network can be received as text message or as continous voice on a special frequency, the ATIS frequency, which can be found on our airport information pages. The ATIS is provided by a controller logged on to the VATSIM network, preferrable the main controller for the specified airport (like the tower or approach controller).

Together with the controller software EuroScope we have a comfortable tool to create ATIS information for our pilots, because EuroScope does create voice and text ATIS messages. For further information on how to configure EuroScope to automatically build ATIS messages please vitis the EuroScope documentation. If you installed the [1], which can be found on the homepage of VACC Austria, everything should work out of the box.

EuroScope

Center

$radioname CPDLC/PDC LOGONCODE
My active sector vats.im/lovv
Charts vats.im/lovv-charts

APP

$radioname CPDLC/PDC LOGONCODE
My active sector vats.im/lovv
Charts vats.im/lovv-chart

TWR/GND/DEL

$radioname PDC LOGONCODE
My active sector vats.im/lovv
Charts vats.im/lovv-chart

@@ Line 5: / Line 5: @@
 On VATSIM we use voice and text ATIS. That means, that the ATIS on the&nbsp;[http://www.vatsim.net VATSIM]&nbsp;network can be received as text message or as continous voice on a special frequency, the ATIS frequency, which can be found on our [http://www.vacc-austria.org/airports airport information pages]. The ATIS is provided by a controller logged on to the VATSIM network, preferrable the main controller for the specified airport (like the tower or approach controller).
-Together with the controller software EuroScope we have a comfortable tool to create ATIS information for our pilots, because [http://www.euroscope.hu EuroScope] does create voice and text ATIS messages from predefined sound files. For further information on how to configure EuroScope to automatically build ATIS messages please vitis the [http://www.euroscope.hu/mediawiki/index.php?title=About_EuroScope EuroScope documentation]. If you installed the [http://www.vacc-austria.org/?page=content/static&id=SOFTWARE_ATC EuroScope VACC Austria Edition], which can be found on the homepage of VACC Austria, everything should work out of the box.
+Together with the controller software EuroScope we have a comfortable tool to create ATIS information for our pilots, because [http://www.euroscope.hu EuroScope] does create voice and text ATIS messages. For further information on how to configure EuroScope to automatically build ATIS messages please vitis the [http://www.euroscope.hu/mediawiki/index.php?title=About_EuroScope EuroScope documentation]. If you installed the [http://files.aero-nav.com/LOVV], which can be found on the homepage of VACC Austria, everything should work out of the box.
-Current sound files for EuroScope to be used with Austrian airports ATIS information can be found [http://downloads.vacc-austria.org/Sectorfiles/LOVV_UniATIS.zip here] (included in EuroScope VACC Austria Edition).<br>
-<br>
-= ATIS templates  =
-To have one common format for ATIS messages we ask you to use the templates below. If you provide a voice ATIS this is not necessary, in that case following notice as text ATIS is enough.
- [Radiostation Name]
- Voice and Text ATIS available on: 123.450 Mhz
-Normally voice ATIS is preferred, but if you are not able to setup a voice ATIS frequency do not forget to change local details in the templates before going online.<br>
 <br>
-== ASRC  ==
+== EuroScope ==
 ==== '''Center'''  ====
@@ Line 30: / Line 17: @@
   Charts vats.im/lovv-charts
-==== '''LOWW APP/TWR/GND/DEL'''  ====
+==== '''APP'''  ====
- $mypvtrw
+  $radioname CPDLC/PDC LOGONCODE
-  $radioname() INFORMATION ALPHA. [online at least until 2000Z]
+  My active sector vats.im/lovv
-  ARR RWY 29 (34). DEP RWY 29. QNH $altim(LOWW). TRL060. TA 5000'.
+  Charts vats.im/lovv-chart
-  For charts and info visit: www.vacc-austria.org
-==== '''LOxx APP/TWR/GND/DEL'''  ====
+==== '''TWR/GND/DEL'''  ====
- $mypvtrw
+  $radioname PDC LOGONCODE
-  $radioname() INFORMATION ALPHA. [online at least until 2000Z]
+  My active sector vats.im/lovv
-  ARR RWY 29 (34). DEP RWY 29. QNH $altim(LOxx). TRL050. TA 4000'.
+  Charts vats.im/lovv-chart
- For charts and info visit: www.vacc-austria.org
-In the fourth line you can add some important info, like ''"Event in progress - expect..."''. If nothing else is important then&nbsp;''"For charts and info, ..."'' should be used instead.<br>
-<br>
-== VRC oder EuroScope  ==
-==== '''Center'''  ====
- Wien Radar  [online at least until 2000Z]
- Service for Austrian (LOxx) airports only!
-  For charts and info visit www.vacc-austria.org
-==== '''Approach/Tower/Ground/Delivery'''  ====
- $radioname() Information&nbsp;%id%. [online at least until 2000Z]
- %runways% QNH $altim(%icao%). TRL60. TA5000’.
- For charts and info visit www.vacc-austria.org
-In VRC only three lines are allowed because the first line will be added by VRC
-In the third line you can add some important info, like ''"Event in progress - expect..."''. If nothing else is important then''"For charts and info, ..."'' should be used instead.<br>
-==== '''Observer'''  ====
-EuroScope does create "ATIS" messages even vor observer. So, as an observer, please use following lines as your "ATIS":
- VACC Austria - vATC in the heart of Europe!
- For charts and info visit www.vacc-austria.org
 [[Category:Documents]][[Category:Training]][[Category:Controller]]

Difference between revisions of "ATIS"

Latest revision as of 16:57, 20 December 2021

Contents

EuroScope

Center

APP

TWR/GND/DEL

Navigation menu

Search